Commander G33 TG ARGB Mid-Tower Chassis
The Commander G33 Tempered Glass ARGB Edition mid-tower chassis is a brand-new high airflow case designed with a special mesh front panel. This entry-level chassis comes with a preinstalled 200mm ARGB fan that can be controlled via motherboard synchronization software or the RGB switch on the I/O port. Located at the rear of the chassis there is another 120mm standard fan preinstalled for outstanding ventilation. Other outstanding features include a 4mm tempered glass panel, a riser GPU support bracket, and removable magnetic filters for overall exceptional pc performance which is the ideal pc case for both gamers and enthusiasts.
- The image is for reference only.
- One 200mm 5V addressable ARGB front fans and one 120mm standard rear fan are included.
The Commander G33 comes with one preinstalled 200mm 5V ARGB fan at the front and one 120mm standard fan at the rear. The fans feature 9 addressable LEDs, hydraulic bearings, and 16.8 million-color illumination to guarantee high airflow and awesome lighting modes.
The 5V ARGB fan can be controlled by using a simple interface built into the I/O panel that cycles through 7 different lighting modes and a range of different color options or your motherboard software.
- The image is for reference only.
- One 200mm 5V addressable ARGB front fans and one 120mm standard rear fan are included.
The chassis comes with one 4mm tempered glass panel on the left side, thicker and more scratch resistant when compared to standard acrylic. On top of this, the enlarged window design enables you to display and admire all your components in their full RGB glory.
Specially designed with a dual GPU placement option, the Commander G33 has the support for vertical graphic card layouts with dual PCI-E slot designs. The PCI-e riser cable is optional. Plus, the included riser GPU support bracket not only can prevent the graphic card from sagging but also helps to reduce the weight on the motherboard. Thermaltake PCI-e X16 Riser Cable (Optional) – Supports a wide range of GPU solutions.
- The image is for reference only.
- One 200mm 5V addressable ARGB front fans and one 120mm standard rear fan are included.
A handy magnetic fan filter on the top simply attaches for easy dust filtration and particulate protection. At the base of the chassis, additional fan filters provide excellent protection against both dirt and dust.
One 3.0 USB, two 2.0 USB, and the RGB button on top-front panel to grant direct access when needed.
| 120mm | 240mm | 360mm | 140mm | 280mm | 420mm | |
|---|---|---|---|---|---|---|
| Front | ● | ● | ● | ● | ● | - |
| Top | ● | ● | - | - | - | - |
| Rear | ● | - | - | - | - | - |
(Water 3.0 and Floe series)
| Performer | Pro | 240 Series | 360 Series | 140 Series | 280 Series | |
|---|---|---|---|---|---|---|
| Front | ● | ● | ● | ● | ● | ● |
| Top | ● | ● | ● | - | - | - |
| Rear | ● | ● | - | - | - | - |
| 120mm | 140mm | 200mm | |
|---|---|---|---|
| Front | 3 | 2 | 2 |
| Top | 2 | 2 | - |
| Rear | 1 | - | - |
| 120mm | 140mm | 200mm | |
|---|---|---|---|
| PURE FAN Series | ● | ● | ● |
| Riing FAN Series | ● | ● | ● |
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.
-
Aura Addressable Header
ASUS -
Digital Pin Header
GIGABYTE -
JRAINBOW Header
MSI -
Addressable RGB LED Header
ASRock
| Category | Caution |
|---|---|
| Chassis, ARGB Fan, ARGB AIO |
|
| RGB Memory, VGA Waterblock, Distro Plate |
|
| P/N | CA-1P3-00M1WN-00 |
|---|---|
| Séries | Commander |
| Model | G33 TG ARGB |
| TYPE DE BOITIER | Middle tower |
| DIMENSIONS (H x L x P) | 442 x 225 x 472 mm (17.4 x 8.85 x 18.58 inch) |
| POIDS NET | 7.72 kg / 17.02 lb |
| PANNEAU LATÉRAL | 4mm Tempered Glass x1 |
| COULEUR | Exterior & Interior: Black |
| MATÉRIEL | SPCC |
| SYSTÈME DE REFROIDISSEMENT | Front (intake) : 200 x 200 x 30mm Addressable RGB fan (600rpm, 24dBA) x 1 Rear (exhaust) : 120 x 120 x 25 mm fan (1000rpm, 16 dBA) |
| BAIES DE LECTEUR | 2 x 3.5“ or 2.5” (HDD Rack); 2 x 2.5” (HDD Bracket) |
| FENTES D'EXTENSION | 7 + 2 |
| CARTES MÈRES | 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
| PORT E/S | USB 3.0 x 1, USB 2.0 x 2, HD Audio x 1, RGB Switch x 1 |
| Bloc Alimentation | Standard PS2 PSU (optional) |
| SOUTIEN DES VENTILATEURS | Front: 120mm x 3, 140mm x 2, 200mm x 2 Top: 120mm x 2, 140mm x 2 Rear: 120mm x 1, 140mm x 1 |
| SUPPORT RADIATEUR | Front: 280mm x 1 ,360mm x 1 Top: 240mm x 1 Rear: 120mm x 1 |
| AUTORISATION | CPU cooler height limitation: 165mm PSU length limitation: 160mm(With HDD Rack) 200mm(Without HDD Rack) VGA length limitation: 300mm VGA width limitation(Vertically): 45mm RAM height limitation: 40mm(With radiator series) |
