Water 3.0 Extreme S Water 3.0 Extreme S Water 3.0 Extreme S Water 3.0 Extreme S Water 3.0 Extreme S Water 3.0 Extreme S Water 3.0 Extreme S
Water 3.0 Extreme S

Water 3.0 Extreme S

Out of stock
P/N
CLW0224-B
99,90 € (included VAT)

-240mm radiator doubles the cooling surface
-Universal Socket Compatibility


Water 3.0 Extreme S

When choosing a high-efficiency liquid cooler to control roaring CPU temps, enthusiasts crave an easy, clean, and low-maintenance setup. The new Thermaltake All-In-One LCS Water 3.0 Series is designed to exceed user expectations. One simple upgrade allows users to enjoy better cooling performance and greater CPU protection.


Water 3.0 Extreme S Unboxing Video

High Performance Waterblock

Full copper base plate maximizes heat conductivity while improving the case's airflow.

High Efficiency Radiator

Especially designed 240mm large surface radiator, supported by two more 120mm fans for additional heat dissipation.

Double Curved Fan

Powerful PWM controlled fan spins between 1200~2000rpm, blowing radiator heat out to the chassis to maximize cooling performance.


High Reliability Pump

The high quality, reliable pump enables maximum water circulation and keeps the copper plate continuously cool.

Easy and Simple Installation

The Water 3.0 Series features the latest cooling performance technology from Thermaltake, providing simple installation and totally maintenance-free operation. Unlike full-blown air coolers, the Water 3.0 series is easy to install and doesn’t take up much room in your case.


Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.
More Information
P/N CLW0224-B
Weight 1071g
Pump Motor speed : 2900+-150 RPM
Rated Voltage : 12V
Rated Current : 175mA
Water Block Copper
Fan Dimension : 120 x 120 x 25mm
Speed : 1000~2000RPM
Noise Level : 20 dBA
Rated Voltage : 12V
Rated Current : 0.3A
Max. Air Flow : 99 CFM
Connector : 4 Pin
Tube Length : 326 mm
Material : Rubber
Radiator Dimension : 270x 120 x 27 mm
Material : Aluminum
Compatibility Intel LGA 2066/2011-3/2011/1366/1200/1156/1155/1151/1150/775
AMD TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
*AIO Cooler bracket adapter comes in the AMD Threadripper CPU box.

User Manual

  • File Name
  • La description
  • Size
  • Version
  • Release Date